振动给料机主要利用振动器或者振动电机带动整个设备作往复直线运动，从而实现物料的输送，南昌矿机专注于研发满足不同工况下的给料机，主要包含hpf重型棒条给料机、gpf棒条给料机以及gzg惯性振动给料机，并广泛应用于初级破碎段的给料。
产品特点
1.重型工况设计的槽体
槽体侧板整体折弯，保证整个框架的强度和刚度，槽体、轴承按重型工况设计，处理量大，抗冲击能力强。
2.独特的十字加强梁设计
十字加强梁组采用矩形管焊接成型，增强整个槽体框架的强度，保证整个设备运行更加稳定。
3.橡胶弹簧隔震
采用橡胶弹簧支撑和隔振，运转、启停平稳，噪音小。
4.整体结构简单紧凑
体积小、重量轻、结构简单紧凑，安装、维修方便、运行费用低。
5.高激振力的振动器
振动单元采用轴偏心加块偏心的重型双轴结构，采用齿轮同步，浸油润滑，齿轮和轴承隔离油润滑；偏心块重量和冲击角可调。
6.耐磨性能高的棒条
棒条材质为高性能耐磨材料，棒条开口可在80~200mm范围调节，两段棒条之间落差高，有利于物料重新分布。
7.稳定的振动单元
采用振动电机作为激振动力源，维护方便、噪音低、重量轻、具有稳定的振幅。
vibration feeders use of vibrator or vibration motor to drive feeder for reciprocating linear motion, so as to convey the material. nms industries focus on the research of feeders to meet different working conditions, the main productions are hpf heavy-duty rod feeders, gpf rod feeders and gzg inertial vibration feeders are widely used in primary broken to convey material.
features
1. the groove of heavy duty design
the groove plate adopts the whole rest bend to ensure the strength and rigidity of the whole frame, the tank and bearing are designed according to the heavy duty condition and have a high capacity of handling and shock resistance.
2. the unique design of the cross girder group
the crossbow is welded with a rectangular tube, and the strength of the frame is guaranteed to ensure the stable operation of the stem.
3. shock isolation with spring
rubber spring is used for supporting and vibration isolation，it makes start-up & shut-down stable and quiet.
4. the overall structure is simple
small size, light weight and compact structure, convenient installation and maintenance, low running cost.
5. the vibration of the high force
the vibration unit is heavy-duty biaxial structure with eccentric shaft eccentricity, gear synchronization, oil lubrication, gear and bearing isolation oil lubrication, the eccentricity block weight and impact angle adjustable.
6. high-proof bar with high performance
the material of the bar is high performance wear-resisting, the opening of the bar can be adjusted in the range of 80~200mm, and the gap between the two bars is high, which is conducive to the redistribution of materials.
7. stable vibrator
vibration motor is used as the vibration power source, the maintenance is convenient, the noise is low, light weight and stable amplitude.
